Differences

This shows you the differences between two versions of the page.

--- various_dimensions_of_hardware_i_often_use_in_3d_printed_projects [16.02.2022 19:54] – Pascal Suter
+++ various_dimensions_of_hardware_i_often_use_in_3d_printed_projects [21.10.2023 11:33] (current) – [Nuts] Pascal Suter
@@ Line 11: / Line 11: @@
 |  | M2 | 2.8 | 1.7 | 3.8 |
 | Flat Head Metal Screw | UNC 4-40 | 3.0 | tbd | 5 |
+|  | M3 | 3.3 | tbd | 6 (head height: 3mm) |
 ====== Nuts ======
-**tight** and **loose** are the circumscribed Polygon radius for a tight fit, where the Nut needs to be pulled in and will stay in, or loose, where it is easy to slied the nut in and out.
+**tight** and **loose** are the circumscribed Polygon radius for a tight fit, where the Nut needs to be pulled in and will stay in, or loose, where it is easy to slide the nut in and out.
 ^ Nominal Size ^ tight ^ loose ^ Thickness ^
 | M3 | 2.8 | 2.9 | 2.5 |
@@ Line 22: / Line 23: @@
 ====== Hole Drill Size for inner Threads ======
 For more dimensions see [[https://schraube-mutter.de/bohrtabelle-fuer-metrisches-iso-gewinde/|Source]]
-^  M1 ^ 0,25 mm | 0,75 mm |
+^ Screw Size ^ Thread spacing ^ drill size ^
-^  M2 ^ 0,40 mm | 1,60 mm |
+^ M1 | 0,25 mm | 0,75 mm |
-^  M3 ^ 0,50 mm | 2,50 mm |
+^ M2 | 0,40 mm | 1,60 mm |
-^  M4 ^ 0,70 mm | 3,30 mm |
+^ M3 | 0,50 mm | 2,50 mm |
-^  M5 ^ 0,80 mm | 4,20 mm |
+^ M4 | 0,70 mm | 3,30 mm |
-^  M6 ^ 1,00 mm | 5,00 mm |
+^ M5 | 0,80 mm | 4,20 mm |
-^  M7 ^ 1,00 mm | 6,00 mm |
+^ M6 | 1,00 mm | 5,00 mm |
-^  M8 ^ 1,25 mm | 6,80 mm |
+^ M7 | 1,00 mm | 6,00 mm |
-^  M9 ^ 1,25 mm | 7,80 mm |
+^ M8 | 1,25 mm | 6,80 mm |
-^ M10 ^ 1,50 mm | 8,50 mm |
+^ M9 | 1,25 mm | 7,80 mm |
-^ M12 ^ 1,75 mm | 10,50 mm |
+^ M10 | 1,50 mm | 8,50 mm |
-^ M14 ^ 2,00 mm | 12,00 mm |
+^ M12 | 1,75 mm | 10,50 mm |
-^ M16 ^ 2,00 mm | 14,00 mm |
+^ M14 | 2,00 mm | 12,00 mm |
+^ M16 | 2,00 mm | 14,00 mm |