This is an old revision of the document!
Tasmota on Emil Lux Swiss Wifi Power Plug
This is for a wifi capable Power Plug available at obi switzerland. The Emil Lux SKU is 400735, It also says “WFR-3-B” and “P/O: 356091” on the label. The plug is available at Obi Switzerland for around 15.- CHF
it needs to be opened to flash and it is held together by two screws with a strange head (3 pins around the head) for which I don't have a matching screw driver.. so i simply drilled them out, The case will clip together just fine, but i would suggest to add some glue or put some tape around it to hold it together for sure.
Inside the device is a TYWE2S module that is based on an ESP8266 chip, so it's perfect for putting tasmota on it :)
Here is the pinout: