Differences

This shows you the differences between two versions of the page.

--- tasmota_on_emil_lux_swiss_wifi_power_plug [14.10.2022 17:10] – Pascal Suter
+++ tasmota_on_emil_lux_swiss_wifi_power_plug [14.10.2022 17:16] (current) – Pascal Suter
@@ Line 2: / Line 2: @@
 This is for a wifi capable Power Plug available at obi switzerland. The Emil Lux SKU is 400735, EAN is 4007874007353 and OBI's product number is 5250527, It also says "WFR-3-B" and "P/O: 356091" on the label. The plug is available at [[https://www.obi.ch/hausfunksteuerung/wifi-stecker-smart-home-weiss-ip20/p/5250527|Obi Switzerland]] for around 15.- CHF
-it needs to be opened to flash and it is held together by two screws with a strange head (3 pins around the head) for which I don't have a matching screw driver.. so i simply drilled them out, The case will clip together just fine, but i would suggest to add some glue or put some tape around it to hold it together for sure.
+**I have read in the reviews at OBI that it is possible to flash this device without opening it using Tuyaconvert**. I didn't try that but opened it instead.
+If you open it to flash it, you will see that it is held together by two screws with a strange head (3 pins around the head) which probably need to be drilled out if you, like me, don't have that special screw driver at hand :) The case will clip together just fine, but i would suggest to add some glue or put some tape around it to hold it together for sure.
 Inside the device is a TYWE2S module that is based on an ESP8266 chip, so it's perfect for putting tasmota on it :)