====== MagicHome RGB(WC) LED Controllers ======
can be purchased on Banggood and Aliexpress for just a few $ (usually around 8-15$ depending on abilities and packaging). 

works best with the Tasmota firmware on them so they can be controlled by mqtt 

since they change their pin-assignments alot, usually the tasmota template in ''sonoff_template.h'' must be adopted. 

here are two templates i got working on my two MagicHome devices

Cheap RGB <code>
  { "MagicHomeRGB",       // Magic Home (aka Flux-light) (ESP8266) - httpstasmota://www.aliexpress.com/item/Magic-Home-Mini-RGB-RGBW-Wifi-Controller-For-Led-Strip-Panel-light-Timing-Function-16million-colors/32686853650.html
     0, 0,
     GPIO_LED1_INV,    // GPIO02 Blue onboard LED
     0,
     GPIO_USER,        // GPIO04 IR receiver (optional)
     GPIO_PWM2,        // GPIO05 RGB LED Green
     0, 0, 0, 0, 0, 0, // Flash connection
     0,                // 
     GPIO_PWM3,        // GPIO13 RGB LED Blue
     GPIO_PWM1,        // GPIO14 RGB LED Red
     0, 0, 0
  },
</code>

More expensive, large box RGBWC (Warm and cold White)<code>
{ "MagicHome",       // Magic Home (aka Flux-light) (ESP8266) - httpstasmota://www.aliexpress.com/item/Magic-Home-Mini-RGB-RGBW-Wifi-Controller-For-Led-Strip-Panel-light-Timing-Function-16million-colors/32686853650.html
     0, 0,
     GPIO_LED1_INV,    // GPIO02 Blue onboard LED
     0,
     GPIO_USER,        // GPIO04 IR receiver (optional)
     GPIO_PWM5,        // GPIO05 Cold White
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_PWM2,        // GPIO12 RGB LED Green
     GPIO_PWM3,        // GPIO13 RGB LED Blue
     GPIO_PWM1,        // GPIO14 RGB LED Red
     GPIO_PWM4,        // GPIO15 Warm White
     0, 0
  },
</code>