zigbee_devices_pairing_mode_select_list [pswiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Zigbee Devices Pairing Mode Select List ======
This is a list of all my zigbee devices and how to enable pairing mode on them, so I don't have to keep every devices manual for that :)

^ Device Type ^ Manufacturer ^ Model ^ Description ^ Routine to enter Paiaring Mode ^
| Switch | Sonoff | SNZB-01 | Wireless single button Switch | open rear side, press reset button for 3 seconds until red led flashes |
| Light Bulb | Moes | ZB-TD5-RCW-GU10 | GU10 RGBWW spot | turn on and off 3 times, then on again, light will pulse until paired | 
| Light Bulp | EweLink | EZ-GU10 ((not supported by Zigbee2MQTT)) | GU10 RGBWW spot | turn on and off 5 times, then on again, light will pulse until paired | 
| Light Bulb | EGLO/AwoX | Connect-Z | E27 and potentially other bulbs | Reset procedure follow [[https://www.youtube.com/watch?v=6Llj6MUycSM|youtube video]], sequence: start with bulb off, then ON 1s, Off 6s, ON 1s, OFF 6s, ON 1s, OFF 6s, ON 12s, OFF 6s, ON 12s, Off 6s, ON |