Differences

This shows you the differences between two versions of the page.

--- workbee_cnc_router [09.08.2020 23:32] – Pascal Suter
+++ workbee_cnc_router [23.12.2021 21:14] (current) – [Workbee CNC Router] Pascal Suter
@@ Line 55: / Line 55: @@
 |MDF|1/8 upcut 2-flute|spiralpocket | 7000 | 500 | no smoke|
 |Valchromat (Colored MDF, slightly harder than regular MDF)|6mm straight 2-flute | 7mm | 10'000 | 2000 mm/min | some vibrations but acceptable quality that only needs slight sanding on visible edges |
-|Aluminum|1/8 2-flute straight| 0.1mm | 6000 | 1000mm/min | slow but decent :) |
+|Aluminum (unknown type)|1/8 2-flute straight| 0.1mm | 6000 | 1000mm/min | dry with air cooling, slow but decent :)|
+|0.5mm Aluminium 50xx | 1/8 2-flute straight| 0.5mm | 16000 | 700mm/min (200mm/min plunge) | cutting fluid in pan, looks professional :) |
+| Brass |1/8 upcut | 0.5 |14000| 500 mm/min | with minimum quantity lubrication |
 ===== G-Code Sender =====
@@ Line 130: / Line 132: @@
 now you should be able to simply access the cncjs gui by entering the hostname of your raspberry in your browser
+it prettymuch runs out of the box now. simply connect to it, choose the usb serial interface and hit connect and you are good to go!
+in the future i will add an [[http://www.escam.cn/product/44-en.html|ESCAM Q6]] ip camera. those things are genious.. they come with everything you need and cost only $26 on banggood or aliexpress. the field of view is also perfect for such applications.
+so far i can't get the stream to display, allthough i can access it with vlc or my webbrowser directy. i have two urls for the sub stream:
+  * http://192.168.169.111/Streams/1/4/ReceiveData
+  * rtsp://192.168.169.111/live/0/sub
+neither show up on screen, got to debug that.. i hope it's not trying to re-encode it on the raspberry using ffmpeg which might be missing.. but we will see..